Categories
Auto Mode Basal Settings PUMP REVIEW Pump Settings

Shortcomings of the Medtronic MiniMed 670g, Auto Mode and Guardian 3 sensors

From the onset let me say I think the Medtronic MiniMed 670G and the Auto Mode setting are a big leap forward in glucose control for Type 1 diabetes. Closed loop insulin pump technology is the technology of the future. Personally I foresee the insulin pump becoming an install-and-forget type of medical device in the near-future. While in no way perfect, the first iteration of the MiniMed 670G was a great step forward in this direction.

Categories
Auto Mode Pump Settings

Solution for the Medtronic 670G AutoMode BG Loop

UPDATE 09/10/19 – A new enhanced transmitter to resolve the BG loop issue is being issued to Medtronic MiniMed 670G owners. This has worked beautifully for me since receiving it about 3 months ago.

To request for the new enhanced transmitter follow this link.

Or you can contact your Medtronic Diabetes Educator or call Medtronic directly for one.


Couple weeks ago, I could not enter Auto Mode on my 670G for three days due to the dreaded “BG Required Loop.” As a solution, I eventually had to change the sensor to be able to re-enter AutoMode.

God knows I have tried to resolve the issue using every advise given online in forums (including trying to “fake” the system by entering a number just above or below your last entry) but these have only worked only a couple times.

What I think Causes the BG Required Loop

At issue I think is the way that the 670G calibrates the Guardian sensor. It seems to be programmed to validate the BG you’ve entered into the system probably based on the ISIG history and its predictive model of where your BG readings are trending towards.

Sounds complicated?

Categories
Auto Mode CGM Sensors Pump Settings

Kicked Out of Auto Mode….Again!

Guardian Sensor Stability and Auto Mode

I have been trying to get back to Auto Mode for the better part of the day today.

As you can see my readings in manual mode were not so bad and I would say those were stable sensor readings. I am not sure what reading variance the Auto Mode algorithm considers acceptable to enter Auto Mode.

Variance does not look too shabby but Auto Mode did not like it.